Porcelain Tub Roll On Refinishing

STEP-3

APPLY MASKING TAPE

Follow written Instructions closely

1

APPLY MASKING TAPE

around entire tub & on all chrome etc.

Wipe entire tub carefully with clean tack cloth.

Why is the tub bottom blue?

This tub is getting a Slip-Grip bottom.   The Slip-Grip here is Blue!

2

Use T-5 Detection Light

to look for any signs of dust or lint

ANY DUST LEFT ON TUB WILL NOW

WILL CAUSE ROUGH SURFACES WHEN DRY

1. Turn T-5 light on

2. Turn off bathroom lights

3. Thoroughly inspect tub for dust or lint etc.

4. Remover all dust with tack cloth

5. Shake tack cloth away from tub often to keep it clean

TUB MUST BE DUST FREE

DUST WILL CAUSE ROUGH SURFACES WHEN DRY

3

IMPORTANT:

1. LEAVE THE ROOM AND DUST YOUR CLOTHES OFF

2. DUST LEFT ON CLOTHING, SKIN OR ON HAIR  WILL CONTAMINATE THE TUB FINISH

3. USE A SUITABLE RESPIRATOR

4. USE GOOD VENTILATION (GENTLY MOVING AIR IS ESSENTIAL)

5. DO NOT DISTURB HIDDEN DUST

6. DO NOT BLOW AIR OUT OF BATHROOM WINDOW

BLOWING AIR OUT OF BATHROOM WINDOW DRAWS DUSTY AIR FROM OTHER ROOMS INTO THE BATHROOM.  AS THE DUST PASSES THROUGH THE BATHROOM IT WILL BE ATTRACTED TO THE WET GLAZE CAUSING ROUGH SURFACES.

SEE E-Z VENT INSTRUCTIONS

PROCEED TO SLIP-GRIP 

If Nor  STEP-3A GLAZING

 Close Page

 © SPR Product Sales 2012