Porcelain Tub Roll On Refinishing

STEP-3A

APPLY GLAZE

Follow written Instructions closely

If you have applied a Slip-Grip bottom, roll the glaze right over it!

APPLY  TUB GLAZE AROUND PERIMETER OF TUB FIRST

1. Use a 1/2 inch brush to apply a narrow coat of glaze next to taped areas

2. Roller will not reach next to taped areas

4

ROLLER MUST REMAIN WET WITH GLAZE AT ALL TIMES

DO NOT APPLY PRESSURE TO ROLLER OR DRY ROLL

START APPLYING GLAZE ON BACK WALL OF TUB

5

USE DIFFERENT MOTIONS FOR DIFFERENT AREAS OF TUB

ROLL TOP EDGE AND OUTSIDE FRONT LAST

WHEN FINISHED ROLLING

LEAVE ROOM FOR 20 TO 30 MINUTES

6

WHEN DRY TO TOUCH

CAREFULLY REMOVE MASKING TAPE

This is a good time to be getting your tools cleaned up and getting ready to calk the tub.

7

CAREFULLY REMOVE TAPE

FROM DRAIN AN OVERFLOW COVER

PROCEED TO  CAULK

 Close Page

 © SPR Product Sales 2012