Porcelain Tub Roll On Refinishing

 

   

STEP-2A

 

Your Choice

ETCHING or WIPE-ON PRIMER

THE TUB SURFACE

Follow written Instructions closely

 

CAUTION: Etch contains a mixture of acids that will remove the gloss from any porcelain or ceramic surface. When pouring etch into measuring cup do it inside the tub. With Etch container and measuring cup inside tub will help to to avoid spills. Do NOT set Etch  container on floor, toilet, counter etc.

Use extreme caution when applying etch, move in slow deliberate pattern to avoid splashing etch on walls or your self.

Use good ventilation (Always) SEE EZ-Vent

1

 

ETCH

APPLY ETCHING SOLUTION-1 TO ALL AREAS OF THE TUB

 

STARTING WITH THE BOTTOM

THEN

WORK SLOWLY UP BACK WALL AND INSIDE ENDS OF TUB

2

APPLY ETCHING SOLUTION TO

TOP & OUTSIDE

 AREAS OF TUB

NEUTRALIZER:  KEEP A SQUEEZE BOTTLE FILLED WITH WATER WITH BAKING SODAS (ONE TS TO 1 QT WATER) ON HAND.  BEFORE ETCHING FRONT OF TUB, APPLY TO FLOOR AREA IMMEDIATELY NEXT TO TUB FRONT TO NEUTRALIZE ANY ACID THAT MIGHT GET ON TILE FLOOR! 

  1. WHEN INSIDE OF TUB IS COMPLETED

  2. APPLY ETCH TO THE TOP  FRONT OF TUB 

  3. CAREFULLY WORK THE AREA ON THE OUTSIDE FRONT OF THE TUB LAST

CAUTION: AVOID GETTING ETCH GET ON TILE WALLS OR FLOORS

 

3

IMPORTANT:

ALLOW ETCH TO REMAIN ON TUB 10-15 MINUTES!

 

 

4

 

 REMOVE ETCH FROM FRONT OF TUB FIRST

USE SPONGE OR RE-USEABLE TACK CLOTH

 TO WIPE  ETCH FROM TUB FRONT

 

RINSE SPONGE OR TACK CLOTH INSIDE TUB TO KEEP IT CLEAN

 

RINSE TUB

USE COLD WATER TO RINSE

USE COLD WATER TO RINSE TUB THOROUGHLY

AT LEAST TWO TIMES

 

 

IMPORTANT:  

REPEAT THE PROCESS ABOVE

 

THE TUB MUST BE ETCHED TWICE AND THOROUGHLY RINSED

 TO INSURE PROPER ADHESION

 

PROCEED TO STEP 3

 

 Close Page

 © SPR Product Sales 2012