Fiberglass Tub Bottom Rebuilding

STEP-1

SET UP TOOL BAR ABOVE TUB

Do not attempt to repair a tub bottom without the tool bar and proper SPR tools!

To do so is counter productive, less than satisfactory results will follow!

1

If tub is cracked place duct tape over crack

2

REMOVE ANY OBVIOUS TRASH FROM TUB BEFORE CLEANING

Tub Before Restoration

3

Wash out obvious dirt and trash

Wash away obvious dirt and trash before starting tub treatment

4

SURFACE PREPARATION

STEP 1 Cleaning the surface. (Purging the surface of all impurities)

CLOSE DRAIN OUTLET TO PREVENT LOSS OF CLEANING COMPOUNDS

CLOSE DRAIN OUTLET TO PREVENT LOSS OF CLEANING COMPOUNDS

5

APPLY STEP-1 CLEANING PRODUCTS

Ad 4 oz diluted Step-1 to bottom of tub.  Sprinkle on 1/2 oz Step-1 Booster and 1/2 oz Fiberglass cleaning powder.

Scrubbing tub with black scrub pad held with EZ Grip handle.

Start at bottom of tub and work up back wall, ends and top of tub.

Clean inside front and apron of tub last to prevent getting product on your arms.

Apply Products to Tub Bottom

Step-1 Booster, Super-Scower and Diluted Step-1  (3 to 1)

CLEAN TUB WITH

EZ HANDLE AND BLACK PAD

6

"OPTIONAL"

CLEAN TUB "BOTTOM"

"STAIN-BLASTER™"  &  BLACK PAD

7

"STAIN-BLASTER™"

Multi Tool

Can be use for Sanding, Scrubbing, Stain Removal and Polishing

8

CLEAN TUB SIDE WALLS, TOP AND FRONT

WITH BLACK PAD AND EZ GRIP HANDLE

9

RINSE TUB

9

 DRY TUB

 Use Star Fiber Towel and Fan to DRY Tub Thoroughly