Kit includes:

• Chemical injector (down stream Injection protect power washer) The correct injector is essential for proper mixture of Roof Color restorer that is used on roof to remove stains.

• Pressure gauge (essential for safe roof stain removal)

• Chemical pickup tube with weighted strainer

• Calibration container

• Roof Wand (see description below)

Includes: Roof-Brite Wand  for Asphalt /Fiberglass Shingles

Wand performs all functions from the roof. Operator is not require to return to the ground until job is complete. Cleans leaves from gutters, Dispensed roof chemicals and rinse shingles etc. with fresh water by use of valves on the wand.

• Cleans leaves from gutters  (NO nozzle changing)

• Dispenses Roof Color Restorer on roof

• Gently rinses away stains safely and effectively

• Comes in two lengths short and long

IMPORTANT:

Specify length SHORT for operator UNDER  5'5" tall or LONG for OVER 5' 5".

HOSE REQUIREMENTS

The pressure hose length is very important in roof stain removal

Your power washer should be equipped with 200 feet of heavy duty hose this will permit you to work on virtually any roof without having to move your equipment once it is setup. If equipment is mounted in vehicle it is necessary to have plenty of hose since driving on lawn is NOT recommended. Your hose must reach  virtually any part of the roof.

You will find however that 200 ft of pressure hose can become quite unruly and should be stored on a hose reel.