Close Page

Restore The Gloss to Moderate to Heavy Dull Hard to Clean

Porcelain on  Steel and Cast Iron Tubs! 

When you need more than a TubTuneUp

    

 

    

Even tubs this bad have been restored to look great

with the SPR NO Spray Tub Restoration Products and Process

 

No Paint, No Spray, & No Odors

SPR kits contain everything you will need to restore 15 or more standard porcelain tubs.

Why Do I Need A 15 Tub Kit?

There is a learning curve for any new new task you undertake. Your first several tubs should be considered practice.  Your first tub will look Ok however each tub you do will look better than the last since you will be learning as you go. You will be learning how to make an old tub look like new again. You can restore the same tub several times until you are happy with the results. Remember each tub you do will look a little better and take a little less time to complete. After several tubs depending on your skills you will have learned how to give any ugly ,dull, hard to clean tub a  "LIKE NEW LOOK". Your appreciation of what this method can do for your property can change your outlook on tub maintenance forever.  After seeing the fantastic results that are so easily achieved you will want to integrate this method of bath tub refinishing into the maintenance schedule for all of your properties!

                                      

Step 1 Clean the tub with the heavy duty scrub pad and a unique blend of mild acids that will remove virtually everything on the tub yet will not harm the surface.

Step 2 Repair any chips or scratches on the tubs surface with our fast hardening permanent chip filler. Our Repair Kit contains all basic products for repairs and is included with your first order.

 

 

Step 3 We recommend applying Slip-Grip™ or a vinyl safety mat to the bottom of the tub for safety and to cover any and all imperfections in the tub bottom.

Step 4 Restore  the tubs surface by applying our unique clear, liquid sealer to all dull areas of the tub. This will fill all minor imperfections. After this step is completely dry apply our gloss coat right over the restored areas. This will restore these areas to a glossy look like the rest of the tub. Keep in mind this is for the restoration of the previously dull areas only.  By restoring the dull areas of the tub we are therefore restoring the original look to the tub. Now that the tub is uniformly glossy its back to its original look!

Step 5 Re-caulk the tub only with our recommended caulking for a like new look. This product contains NO Silicone. We do not recommend the use of silicone since it is hard to work with and very difficult to remove also it supports mildew growth. We have found that our recommended is very easy to apply and work with. It is easy to clean up with water, dries fast and last practically forever.

We "recommend" that every restored tub have a slip resistant bottom installed either SPR Slip-Grip or a professional vinyl mat. This is NOT absolutely imperative however it looks better and is safer for the user.  

COMPLETE AND DETAILED INSTRUCTIONS ARE INCLUDES WITH EACH KIT

Order

# TKP 15  Porcelain Tub Restoration Kit

 

    Close Page

 © SPR Product Sales 2007