Close Page

  Do Your Tubs Look Like This?  

Nobody Likes A Grungy UGLY Tub!

YOU DO NOT NEED A NEW TUB

They Could Look Like This With SPR Products

Easy To Apply Safety Mats That Really Work!

Will Not Stain, Mold, Mildew, Discolor or Peel up

GUARANTEED one full year!

Slippery Tub Surfaces Made Safer Instantly

Tub Mat Brochure  (Printable)

1. Measure your tub area to be covered

2. Clean and dry the surface. Gently peel back one inch of the paper backing along the back edge of the mat being careful not to touch the adhesive backing. Position the mat and press the edge of the mat into place.

3. Reach under the mat and grasp the loose end of the paper and peel it back slowly while you continue to press the mat into place.

4. We recommend a non marking acrylic brayer (roller) for best adhesion and rolling out all air bubbles during installation.

COLOR WHITE, CLEAR & ALMOND

IMPORTANT: To comply with ASTM Regulation F-462-79, be sure the size selected is no more than 1.5 inches from the sides of the tub and drain.  All tubs with a factory non-skid etching must be completely covered.

TUBS MUST BE CLEANED PROPERLY BEFORE MAT INSTALLATION

 We Recommend SPR Tub Clean up products for best results

SPR Step 1 Tub Cleaner

Super cleans porcelain or fiberglass tubs.  Promotes adhesion for vinyl tub mats 

Removes:

Dirt,

Body Oils,

Soap Scum,

Mineral Deposits

SPR Step 1 Tub Cleaner concentrated tub cleaner. Use 1 to 3 ounces per tub depending on condition.

Requires SPR White Scrub pads below.  (Will not scratch porcelain or fiberglass tubs)

 cleaner Order # S1MPC

GluAway™

ADHESIVE REMOVER

Quickly and easily removes old adhesive

Safe for use on porcelain or fiberglass tubs

  Order #  GluAway

Tub Mat Maintenance

Easy to clean with any good liquid detergent and SPR STIFF BRISTLE brush

Comfortable, easy to grip handle for fast, efficient cleaning

Brush order #  SBbrush

             Close Page