Tub Bottom Restorer Mat

 

TUB MAT REMOVAL

 

   

 

USE A HEAT GUN TO GENTLY HEAT THE MAT AS YOU SLOWLY PULL IT UP

 

IMPORTANT: If you pull to fast the adhesive will remain on the tub

 

  1. Start at a back corner

  2. HEAT 3 - 4 inches of mats corner

  3. Use razor blade to loosen corner from tub. Just enough to get hold of with fingers.

  4. SLOWLY Pull the mat toward you and toward the opposite end of the tub.

  5. Keep heating the mat and gently pulling until it comes completely loose

 

If adhesive remain on tub use SPR Mat Adhesive Remover.

 

 Close Page

 © SPR Product Sales 2012