Porcelain Tub Roll On Refinishing

TO BEGIN

SET UP LIGHT SOURCE

Do not attempt to refinish a tub without first setting up a good light source above the tub preferably attached to the shower curtain bar or towel holder!

To do so is counter productive, less than satisfactory results will follow!

1

STEP-1A

BEFORE STARTING THE ROLL ON PROCESS

Remove Excess Dirt etc. From Tub

2

Wash out obvious dirt and trash before starting treatment

Wash away obvious dirt and trash before starting tub treatment

3

SURFACE PREPARATION

  STEP 1 Cleaning the surface. (Purging the surface of all impurities)

CLOSE DRAIN OUTLET TO PREVENT LOSS OF CLEANING COMPOUNDS

CLOSE DRAIN OUTLET TO PREVENT LOSS OF CLEANING COMPOUNDS

4

APPLY STEP-1 CLEANING PRODUCTS

Ad 4 oz diluted Step-1 to bottom of tub.  Sprinkle on 1/2 oz Step-1 Booster and 1/2 oz Super-Scower.

Scrubbing tub with Black or Brown scrub pad held with EZ Grip handle.

Start at bottom of tub and work up back wall, ends and top of tub.

Clean inside front and apron of tub last to prevent getting product on your arms.

Apply Products to Tub Bottom

Step-1 Booster, Super-Scower and Diluted Step-1  (3 to 1)

CLEAN TUB WITH

EZ HANDLE, BLACK or BROWN PAD

5

"OPTIONAL"

CLEAN TUB "BOTTOM"

"STAIN-BLASTER™"  &  BLACK or BROWN PAD

6

"STAIN-BLASTER™"

Multi Tool

Can be use for Sanding, Scrubbing, Stain Removal and Polishing

7

CLEAN TUB SIDE WALLS, TOP AND FRONT

WITH APPROPRIATE SCRUB PAD AND EZ GRIP HANDLE

8

RINSE TUB