Fiberglass Tub Bottom Rebuilding

Paint Removal 

FIBERGLASS TUBS

Up until now fiberglass tubs that had been refinished (painted) could NOT be stripped of a previous refinishing coating when it began to fail. 

CAUTION:

NEVER use Mehylene Chloride Stripper on Fiberglass or Acrylic

Strippers with Mehylene Chloride

will soften and destroy Fiberglass and Acrylic Tub Surface

Peeling paint can now be safely removed from fiberglass without destroying it.

 StripSafe removes paint safely from  fiberglass and acrylic tubs

●NO ODORS   ●NO VOC

 One of the LARGEST complaints from apartments / hotels is ODORS

 StripSafe removes paint safely from porcelain & fiberglass tubs

Environmentally Safe

NO Methylene Chloride

"Safest method ever developed for tub stripping"

WILL NOT BURN SKIN

Can be sprayed, brushed or rolled on Tub or Tile

StripSafe™

    EFFECTIVE, ECONOMICAL 

Removes virtually any bathtub paint

From Porcelain & Fiberglass

See how easy it is!

Easily applied with squirt bottle (like ketchup or mustard). Squirt heavy amount on top rim of tub as it runs down sided of tub spread with a bristle brush. Heavy coat required for best response.

Spread heavy even layer over entire surface.

or

Spray it on if you have multiple tubs in a hotel etc.

Gun MUST be cleaned after application. Material can NOT be left in spray gun!

Capable of removing multiple coats of paint with one application

Obviously this is a porcelain tub but the process is very similar

with the exceptions mentioned on this page.

Great For Apartments & Hotels

         Roll, Brush or Spray

1. Allow to set 30 minutes to 12 hrs depending on the kind of paint

2. Come back the next day

3. Peel away the paint

4. It could not be easier

CAUTION:

NEVER USE A METAL BLADE OF ANY KIND ON A FIBERGLASS SURFACE

IT WILL RUIN THE SURFACE!

Metal blades on fiberglass will create numerous cuts and gouges!

USE ONLY A HARD PLASTIC SCRAPER ON FIBERGLASS

Scraper for fiberglass is easily made from a Formica type (laminate) sample chip. Sharpening one edge to make a hard plastic scraper. Sharpen edge by rubbing it against a piece of coarse sand paper

Laminate scraper can be re-sharpened and it will NOT damage the surface!

Laminate sample chips can be picked up FREE

at any building supply store selling laminate counter tops

DO NOT use metal razor blades to scrape paint from FIBERGLASS

USE ONLY A HARD PLASTIC SCRAPER

AFTER STRIPPING FIBERGLASS TUB

for

Difficult To  Remove Paint Specks Clean Surfaces

Along with Diluted APC cleaner a White Scrub Pad

Mild acid solution cleans without harm

 SPR  (APC)  All purpose Cleaner

EZ-Vent

Clean fresh air is very important for health

This is a must when any kind of fume is present!

50' L  X  10' D

Moves 665 Cu Ft of air per minute

Removes toxic stripper fumes from work area. 

NEVER use Mehylene Chloride Stripper on Fiberglass or Acrylic

Strippers with Mehylene Chloride

will destroy Fiberglass and Acrylic Tubs.

Close Page